Expansion Modules
c
DSE2170
DSENet® RTD / Thermocouple Input & Analogue Output Expansion Module
The DSE2170 RTD/Thermocouple Input and Analogue Output Expansion Module has been developed for use with the DSEG8600 platform and DSEM-Series platform. The DSE2170 extends the host modules input and output capabilities for increased application flexibility. This is achieved by providing an additional 4 RTD/thermocouple inputs (configurable as J Type, K Type, L Type, Pt100 or Pt1000) and 4 analogue outputs (configurable as 0 V to 10 V or 0 mA to 20 mA).
For enhanced communication with the host module, the DSE2170 features a DSENet® port for connection to the DSEG8600 platform and a CAN port for connection to the DSEM-Series platform. A red status LED is provided to easily identify when the DSE2170 is connected to a power source and communicating with the host controller.
OVERALL SIZE
120 mm x 75 mm x 31.5 mm / 4.72 ” x 2.95 ” x 1.24 ”
MOUNTING
DIN Rail: 35 mm / 1.35”
Chassis: 2 M4 mounting holes with 108 mm x 63 mm / 4.25” x 2.48” centres
PRODUCT VARIANTS
2170-01
120 mm x 75 mm x 31.5 mm / 4.72 ” x 2.95 ” x 1.24 ”
MOUNTING
DIN Rail: 35 mm / 1.35”
Chassis: 2 M4 mounting holes with 108 mm x 63 mm / 4.25” x 2.48” centres
PRODUCT VARIANTS
2170-01
Request a Quote
Product Highlights
Key Features
4 RTD/Thermocouple Inputs
4 Analogue Outputs
Status LED to indicate Power On and Link Lost
DSENet® Communication
CAN Communication
Specification
DC Supply
CONTINUOUS VOLTAGE RATING8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 ms, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs are not maintained during cranking.
MAXIMUM OPERATING CURRENT
200 mA at 12 V, 95 mA at 24 V
MAXIMUM STANDBY CURRENT
50 mA (no communication active)
Inputs / Outputs
RTD / THERMOCOUPLE INPUTSNumber: 4
Type: J Type Thermocouple, K Type Thermocouple, L Type Thermocouple, Pt100 or Pt1000
ANALOGUE OUTPUTS
Number: 4
Type: 0 V to 10 V or 0 mA to 20mA
Communications
DSENet®Fully Isolated
CAN
Fully Isolated
Environmental Testing Standards
Electro-Magnetic Compatibility
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment
Electrical Safety
BS EN 61010
Safety of Information Technology Equipment, including Electrical Business Equipment
Temperature
BS EN 60068-2-1
Ab/Ae Cold Test -30°C
BS EN 60068-2-2
Bb/Be Dry Heat +70°C
Vibration
BS EN 60068-2-6
Ten sweeps in each of three major axes
5Hz to 8 Hz at ±7.5mm
8Hz to 500 Hz at 2Gn
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment
Electrical Safety
BS EN 61010
Safety of Information Technology Equipment, including Electrical Business Equipment
Temperature
BS EN 60068-2-1
Ab/Ae Cold Test -30°C
BS EN 60068-2-2
Bb/Be Dry Heat +70°C
Vibration
BS EN 60068-2-6
Ten sweeps in each of three major axes
5Hz to 8 Hz at ±7.5mm
8Hz to 500 Hz at 2Gn
Humidity
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55°C at 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40°C at 93% RH 48 Hours
Shock
BS EN 60068-2-27
Three shocks in each of three major axes
15 Gn in 11 ms
Degrees of Protection Provided by Enclosures
BS EN 60529
IP21
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55°C at 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40°C at 93% RH 48 Hours
Shock
BS EN 60068-2-27
Three shocks in each of three major axes
15 Gn in 11 ms
Degrees of Protection Provided by Enclosures
BS EN 60529
IP21
Product Variants
2170-01
