Vehicle & Off-Highway Machinery Control Systems (M-Series)
DSEM835
3.5" Programmable Display
112.5 mm x 115 mm x 49 mm / 4.43 ” x 4.53 ” x 1.93 ”
WEIGHT
< 1 kg
2.20 lb
CUT-OUT
PRODUCT VARIANTS
M835-01
Request a Quote
Product Highlights
Key Features
Specification
DC Supply
CONTINUOUS VOLTAGE RATING
8 V DC to 32 V DC Continuous
MAXIMUM OPERATING
< 80 mA at 24 V without external loads
< 100 mA at 12 V without external loads
Display
MEASUREMENT
320 x 240 resolution 24 bit colour. Optically bonded
500 cd/m² (nit)
Inputs
INPUTS
Quantity: 4
Type: Voltage 0 V to 10 V, Current 0 mA to 20 mA, Resistive 0 Ω to 3400 Ω, Frequency (Input 1 only) 1 Hz to 150 Hz, Digital Positive / Negative
Outputs
OUTPUTS
Quantity: 3
Type: Digital - High Side
Processor
TYPE
STM32h743
Speed
400 MHz Clock Speed
RAM
1 MB total
288 kB for CODESYS including application variables and fonts
NON-VOLATILE FRAM
16 kB for device settings and application persistent variables
Interfaces / Communications
CAN
CAN Interfaces 2.0 A/B, ISO11898
50 kbits/s...1 Mbit/s
SAE J1939 or Raw CAN
Temperature
OPERATING TEMPERATURE
-40 ˚ C to +85 ˚ C / -40 ˚ F to + 185 ˚ F
STORAGE TEMPERATURE
-40 ˚ C to +85 ˚ C / -40 ˚ F to +185 ˚ F
Environmental Testing Standards
BS EN 6100-6-2
Electromagnetic Compatibility (EMC) Noise Immunity
BS EN 6100-6-4
Electromagnetic Compatibility (EMC) Emission Standard
ISO 11452
Electromagnetic Compatibility (EMC) Road Vehicles
ISO 7637-3:2016
Electromagnetic Compatibility (EMC) Road Vehicles - Electrical Disturbances from Conduction and Coupling
Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines.
ELECTRICAL SAFETY
BS EN 61010
Safety requirements for electrical equipment for measurement, control & laboratory use
BS EN 61010:2020
Part 1: General Requirements
BS EN 61010-2-30:2010
Part 2-030: Particular requirements for measuring circuits
ELECTRICAL TESTS
ISO 16750-2:2012
Road Vehicles - Environmental Conditions and testing for Electrical & Electronic Equipment
Part 2: Electrical Loads
4.6.3 Starting Profile
4.6.4 Load Dump
EN 60068-2-30
Damp Heat , Cyclic Upper Temperature 55 ˚C
EN 60068-2-78
Damp Heat, Steady State Test Temperature 40 ˚C/93% RH (21 Day Duration)
MECHANICAL TESTS
EN 60068-2-6
Part 2-6: Tests - Test Fc: Vibration (Sinusoidal)
EN 60068-2-27
Part 2-27: Tests - Test Ea: Shock
Ab / Ae Cold test -40 C (-40 F)
Bb / Be Dry Heat +85 C (185 F)
CHEMICAL
ISO 1675-5
Chemical Testing for Electrical and Electronic Equipment - Road Vehicles