DSENet® Input (8) Expansion Module
The DSE2130 is an input expansion module providing 8 additional inputs to the control module. Four of these can be configured for use as analogue inputs. Up to 4 x DSE2130 modules can be linked together to provide up to 32 additional inputs.
Designed to give greater flexibility for meeting complex industry generator control specifications.
All configurations are controlled within the host control module.
To view UL Certification click here.
134 mm x 76 mm x 49 mm (5.3” x 3.0” x 1.9”)
2130-00 - 2130 Input Expansion Module
Request a Quote
DC SUPPLYCONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT
200 mA at 12 V, 100 mA at 24 V
MAXIMUM STANDBY CURRENT
120 mA at 12 V, 60 mA at 24 V
Environmental Testing Standards
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
2130-00 - 2130 INPUT EXPANSION MODULE