Intelligent Battery Chargers

BC2415i

24 Volt, 15 Amp Intelligent Battery Charger
The DSEBC2415i is an intelligent 24 volt, 15 amp switched-mode battery charger that has fully programmable charging curves, making it suitable for multiple different battery chemistry types. The battery charger is programmed using the DSE Configuration Suite PC Software and is mounted direct to a chassis or onto DIN rail for ease of integration and installation. There are also three integrated LEDs mounted to the battery charger to indicate current charging status and fault conditions.

The battery charger has no moving parts, delivering additional durability and reliability, and continues to operate when the engine is running.
OVERALL SIZE
205 mm x 135 mm x 80 mm / 8.0 " x 5.3 " x 3.1" 

WEIGHT
0.78 kg 
1.7 lb 27.5 oz

PRODUCT VARIANTS
BC2415i-01 

Request a Quote

e -
Please select a product
Please enter a quantity
e +

add another product

Please enter your title
Please enter your first name
Please enter your surname
Please enter your company name
Please select your country
Please enter a delivery County/State
Please enter your email
Please enter your mobile number
Webform URL: Website Option: Webform: Named Distributor: Distributor's Email: Named Reseller: Reseller's Email:


l

Product Highlights

Key Features

Key Features

Fully configurable charging voltages and current limit provides compatibility for a wide range of different battery chemistries
Fully configurable two, three or four stage charging profiles to optimisation charging efficiency
Automatic and / or manual boost, and storage charge functions to help maintain battery condition
Configurable temperature compensation on charging voltage to optimisation charging efficiency and battery condition
Digital microprocessor and switched-mode power supply technology to provide high operating efficiency with low charge output ripple and superb line regulation.
Automatic and / or manual battery connection test.
Designed to be permanently connected to a battery and AC Supply. There is no need to disconnect during high load conditions such as when an engine is cranking or running
Status and fault indication provided by three multi-colour LEDs.
PC configuration using DSE Configuration Suite
Integrated DSENet® / RS485 port providing ability to be connected to a DSEGenset module as an expansion module, or Modbus RTU support

Specification

AC Supply

MINIMUM SUPPLY VOLTAGE
95 V AC with Charge Output De-rate

110 V AC without Charge Output De-rate

MAXIMUM SUPPLY VOLTAGE
305 V AC

FREQUENCY RANGE
48 Hz to 64 Hz

MAXIMUM OPERATING CURRENT
4.0 A AC at 110 V AC, 2.3 A AC 230 V AC

Charge Output

VOLTAGE RANGE
24 V DC to 29 V DC

VOLTAGE RIPPLE AND NOISE
Less than 1 % of configured Boost Voltage

VOLTAGE LOAD REGULATION
2 %

Digital Input

NUMBER
1

TYPE
Contact between terminals

Temperature Input

NUMBER
1

TYPE
PT1000

Charger Fail Output

NUMBER
1

TYPE
Changeover Volt-Free Contact

Protections

AC SUPPLY
Over and Under Voltage

Over and Under Frequency

CHARGE OUTPUT
Reverse Polarity

Under and Over Voltage

Over Current

Short Circuit


Environmental Testing Standards

ELECTRO-MAGNETIC  COMPATIBILITY
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.

ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.

TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.

VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.

HUMIDITY
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.

SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.

Product Variants

No product variants available