Search Results
DSEG8660 Mains (Utility) Controller
The DSEG8660 is a ATS / Mains (Utility) controller with integral heater designed to work with the DSEG8600 that is configured for use as a multi-set controller. The DSEG8660 allows multiple generators to synchronise with a mains (utility) supply and controls switching power between generator and mains (utility) sources, without loss of supply to the load.
https://www.deepseaelectronics.com/genset/advanced-paralleling-gen-set-controllers/dseg8660DSE331 Auto Transfer Switch Control Module
The DSE331 Automatic Transfer Switch Control Module monitors the voltage and frequency of an incoming AC supply from two different sources. These sources can be generator or mains (utility), or a combination of both. The control module monitors Source 1 (S1) and Source 2(S2). When a failure occurs a start command is issued to the inactive source to take over the load. The module will return the load to the mains (utility) as soon as this becomes available. To view UL ...
https://www.deepseaelectronics.com/ats/automatic-transfer-switch-control-modules/dse331DSEG0123 Load Share Lines Interface
The DSEG0123 Analogue Load Share Lines Interface converts DSE AMSC / MSC digital load share communications to universal analogue load share lines, allowing DSE paralleling controllers to seamlessly deliver kW and kvar load sharing with third party manufactured products. The DSEG0123 also allows the DSEG8600, DSEG8900, DSE8610 MKII, DSE8610, DSE7510 and DSE5510 controllers to be added to an existing DSE load sharing application and deliver kW and kvar load sharing across all DSE controllers...
https://www.deepseaelectronics.com/genset/expansion-modules/dseg0123DSE Assistant Configuration File Upload Tool Software Downloads
DSE Assistant is an intelligent software tool that allows a single configuration file to be uploaded to multiple DSE control modules in mass production factory environments. Users have the ability to create a single file that contains the config, firmware and language files. This is then added to DSE Assistant and uploaded to connected modules. The software can also be used to read and save files from within a control module for use in other modules or to assist with config analysis. Please...
https://www.deepseaelectronics.com/genset/software-tools/dse-assistant/softwareDSEG8680 Bus-Tie Controller
The DSEG8680 Bus-Tie controller is designed to work with the DSEG8660 and DSEG8600 (configured for use as a multi-set controller, mains (utility) controller or group controller) to provide control solutions for complicated system design. The DSEG8680 is configurable for use as a bus-tie controller or load switch controller. This enables the controller to use the AMSC (Advanced Multi-Set Communications) link to synchronise two bus segments together within a DSEG8xxx system and allow them to...
https://www.deepseaelectronics.com/genset/advanced-paralleling-gen-set-controllers/dseg8680DSEG8900 7" Colour Parallel Genset Controller
The DSEG8900 is a 7” colour parallel genset controller designed for complex paralleling applications. The DSEG8900 can be configured to provide single-set and multi-set paralleling on a single site and provides a wide range of high-end features for multiple application environments.
https://www.deepseaelectronics.com/genset/advanced-paralleling-gen-set-controllers/dseg8900DSE9470 MKII 24 Volt, 10 Amp Intelligent Battery Charger
The DSE9470 MKII is an intelligent 12/24 volt, 10 amp switched-mode battery charger that has fully programmable charging curves, making it suitable for multiple different battery chemistry types. The battery charger is programmed using the DSE Configuration Suite PC Software and is mounted direct to a chassis or onto DIN rail for ease of integration and installation. There are also three integrated LEDs mounted to the battery charger to indicate current charging status and fault...
https://www.deepseaelectronics.com/power/intelligent-battery-chargers/dse9470-mkiiDSE8610 MKII Synchronising & Load Sharing Auto Start Control Module
The DSE8610 MKII is a market-leading Synchronising Auto Start Control Module suitable for use in a multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and non-electronic engines. The DSE8610 MKII monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault conditions.System alarms are annunciated on the LCD screen (multiple language options available),...
https://www.deepseaelectronics.com/genset/load-sharing-synchronising-control-modules/dse8610-mkiiAdvanced PLC Editor For Multiple Module Types
DSE's Advanced PLC Editor has been developed for use with the 86xx MKII, 73xx MKII and E400 control modules. The editor is embedded into the DSE Configuration Suite software and provides multiple function types for advanced load share applications. The editor utilises its own viewing window allowing users to work within the editor and the configuration suite software simultaneously. Please Note: This software is free to download.
https://www.deepseaelectronics.com/genset/plc-editor-software/advanced-plc-editorDSEA109 Digital Automatic Voltage Regulator (AVR) with CAN Communications & PMG Support
The DSEA109 Digital Automatic Voltage Regulator (AVR) is designed to regulate the output voltage of an AC generator. The DSEA109 is supplied by either a Permanent Magnet Generator (PMG), stator auxiliary winding or self excited from the generator’s main stator windings (shunt).The DSEA109 eliminates the complexities involved with analogue AVR designs. Analogue AVR designs can be oversensitive to change in temperature which affects the generators output voltage stability, where as the...
https://www.deepseaelectronics.com/genset/digital-automatic-voltage-regulators-avr/dsea109