Advanced Paralleling Gen-Set Controllers

DSEG8600

Parallel Genset Controller with Integral Heater

User Configurable as: Single-Set Controller / Multi-Set Controller/ Mains (Utility) Controller / Group Controller

The G8600 is a parallel genset controller with integral heater designed for complex paralleling applications. The G8600 can be configured to provide paralleling for up to 4,032 generators on a single site and provides a wide range of high-end features for multiple application environments. The module is configurable for use as a single-set controller, multi-set controller, mains (utility) controller or group controller.

 
LEARN MORE

DSEG8660

Mains (Utility) Controller

The DSEG8660 is a ATS / Mains (Utility) controller with integral heater designed to work with the DSEG8600 that is configured for use as a multi-set controller. The DSEG8660 allows multiple generators to synchronise with a mains (utility) supply and controls switching power between generator and mains (utility) sources, without loss of supply to the load.

 
LEARN MORE

DSEG8680

Bus-Tie Controller

The DSEG8680 Bus-Tie controller is designed to work with the DSEG8660 and DSEG8600 (configured for use as a multi-set controller, mains (utility) controller or group controller) to provide control solutions for complicated system design. The DSEG8680 is configurable for use as a bus-tie controller or load switch controller. This enables the controller to use the AMSC (Advanced Multi-Set Communications) link to synchronise two bus segments together within a DSEG8xxx system and allow them to operate in parallel.

 
LEARN MORE

DSEG810

DSESCADA 10” Display

Hardware
The DSEG810 is a 10” capacitive touchscreen DSE SCADA overview display designed for monitoring and controlling multiple applications. It runs on the reliable LINUX based operating system and is designed for use with the DSEG8-Series paralleling controller platform. When installed, the unit offers IP67 protection all round, and the powerful NXP i.MX 8 QuadXPlus processor ensures smooth operation. The unit is connected to DSEG8-Series controllers via Ethernet.

Software
DSE SCADA is a secure software platform that provides advanced multi-set monitoring & commissioning functionality for DSEG8-Series controllers. The stand-alone software is pre-loaded onto each device, which includes a full software license. The software can be configured to connect with individual / multiple generators on the same site. Users can gain a full system overview from any remote location with an Internet connection. The software provides multi-set commissioning.

 
LEARN MORE

DSEG8900

7" Colour Parallel Genset Controller

The DSEG8900 is a 7” colour parallel genset controller designed for complex paralleling applications. The DSEG8900 can be configured to provide single-set and multi-set paralleling on a single site and provides a wide range of high-end features for multiple application environments.

 
LEARN MORE

DSEG8007

7” Graphical Colour Remote Overview Display

The DSEG8007 is a 7” touch screen, full colour, graphical display providing the user with remote control and monitoring of an entire system. It has been designed to seamlessly integrate with the single-set and multi-set DSEG8600 modules, with configuration options suitable for a wide variety of applications. The DSEG8007 display screen design provides comprehensive large screen graphs, meters and numeric values to indicate engine, generator and mains (utility) status information in a clear and concise format.

 
LEARN MORE

DSE2160

DSENet® Input / Output Expansion Module

The DSE2160 DSENet® Input / Output Expansion Module has been developed for use with the DSEG8600 and DSEM-Series platforms. The DSE2160 extends the host modules input and output capabilities for increased application flexibility. This is achieved by providing an additional 8 inputs, consisting of 2 analogue inputs (both can be configured as digital) and 6 digital inputs (digital input A can be configured as a frequency input, pulse counter or RPM input). The DSE2160 also provides 8 additional digital outputs. All 8 outputs can be individually configured as a digital input, positive switching DC output or a negative switch DC output.

For enchanced communication with the host module, the DSE2160 features a DSENet® port for connection to the DSEG8600 platform and a CAN port for connection to the DSEM-Series platform. A red status LED is provided to easily identify when the DSE2160 is connected to a power source and communicating with the host controller.

 
LEARN MORE

DSE2170

DSENet® RTD / Thermocouple Input & Analogue Output Expansion Module

The DSE2170 RTD/Thermocouple Input and Analogue Output Expansion Module has been developed for use with the DSEG8600 platform and DSEM-Series platform. The DSE2170 extends the host modules input and output capabilities for increased application flexibility. This is achieved by providing an additional 4 RTD/thermocouple inputs (configurable as J Type, K Type, L Type, Pt100 or Pt1000) and 4 analogue outputs (configurable as 0 V to 10 V or 0 mA to 20 mA).

For enhanced communication with the host module, the DSE2170 features a DSENet® port for connection to the DSEG8600 platform and a CAN port for connection to the DSEM-Series platform. A red status LED is provided to easily identify when the DSE2170 is connected to a power source and communicating with the host controller.

 
LEARN MORE

DSESCADA

DSE Paralleling SCADA

DSESCADA is secure software that provides advanced multi-set monitoring & commissioning functionality. The stand-alone software is downloaded from the DSE website and installed onto a Windows based laptop/desktop machine. The software can be configured to connect with individual / multiple generators on the same site. Users are able to gain full system overviews from any remote location with an Internet connection.

The software provides multi-set commissioning functionality, which is unlocked by purchasing a multi-set commissioning license. Licenses are unique to each computer they are installed on. Multi-set commissioning allows users to configure generators independently or apply single settings to multiple generators at the same time.

 
LEARN MORE

DSE020-1044-01

G86XX Rear Panel Mount

Rear mount panel bracket for use with the DSEG8600 or DSEG8660 controllers. The bracket fixes into the rear of a panel and a control module is clipped in screen side down, leaving the rear of the module exposed for easy wiring connection.

 
LEARN MORE