Search Results
DSE6120 MKIII Auto Mains (Utility) Failure Control Module
The DSE6120 MKIII is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, genset applications. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC.The module is compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offers an extensive number of flexible inputs,...
https://www.deepseaelectronics.com/genset/auto-mains-utility-failure-control-modules/dse6120-mkiiiDSE8003 MKII 7" Graphical Colour Multi-Set Remote Overview Display
The DSE8003 is a full colour 7” graphical remote overview display. It has been designed to seamlessly integrate with 86xx MKII load share control modules. The MKII version offers an improved graphical user interface and faster operating response times compared to its MKI predecessor. Using a RS485 link a single overview display can be connected to multiple control modules over a maximum distance of 1.2km.
https://www.deepseaelectronics.com/genset/remote-communications-overview-displays/dse8003-mkiiDSEG0123 Load Share Lines Interface
The DSEG0123 Analogue Load Share Lines Interface converts DSE AMSC / MSC digital load share communications to universal analogue load share lines, allowing DSE paralleling controllers to seamlessly deliver kW and kvar load sharing with third party manufactured products. The DSEG0123 also allows the DSEG8600, DSEG8900, DSE8610 MKII, DSE8610, DSE7510 and DSE5510 controllers to be added to an existing DSE load sharing application and deliver kW and kvar load sharing across all DSE controllers...
https://www.deepseaelectronics.com/genset/expansion-modules/dseg0123DSEE100 Engine Only Control Module
The E100 is an Engine Only Control Module designed to provide flexible engine control with built-in monitoring and protection. The module is fully configurable for a wide range of applications including engine driven pumps and compressors. Control functions include manual and automatic engine start and load control and built-in run-time scheduler. The DSEE100 also features an event log to help make fault diagnosis extremely simple. The module is configured using the DSE Configuration Suite...
https://www.deepseaelectronics.com/control/engine-pump-control-modules-e-series/dsee100DSEM810 (Keyed) 10” Programmable Display
The DSEM810 is a 10” programmable display designed for use on vehicles and off-highway machinery. Developed for use as a standalone product or as part of a larger system, the DSEM810 provides users with outstanding flexibility. CANopen, SAE J1939 and raw CAN connectivity allow the configurable on-board I/O to be supplemented with a range of devices including DSEM64X programmable controllers or CAN enabled distributed I/O such as DSE2160 or DSE2170.Two independent CAN interfaces and onboard...
https://www.deepseaelectronics.com/control/vehicle-off-highway-machinery-control-systems-m-series/dsem810-keyedDSE Assistant Configuration File Upload Tool
DSE Assistant is an intelligent software tool that allows a single configuration file to be uploaded to multiple DSE control modules in mass production factory environments. Users have the ability to create a single file that contains the config, firmware and language files. This is then added to DSE Assistant and uploaded to connected modules. The software can also be used to read and save files from within a control module for use in other modules or to assist with config analysis. Please...
https://www.deepseaelectronics.com/genset/software-tools/dse-assistantDSEG8680 Bus-Tie Controller
The DSEG8680 Bus-Tie controller is designed to work with the DSEG8660 and DSEG8600 (configured for use as a multi-set controller, mains (utility) controller or group controller) to provide control solutions for complicated system design. The DSEG8680 is configurable for use as a bus-tie controller or load switch controller. This enables the controller to use the AMSC (Advanced Multi-Set Communications) link to synchronise two bus segments together within a DSEG8xxx system and allow them to...
https://www.deepseaelectronics.com/genset/advanced-paralleling-gen-set-controllers/dseg8680DSE4610 Auto Start Control Module
The DSE4610 is a compact Auto Start Control Module that has been developed to provide an outstanding range of features within a compact enclosure.
https://www.deepseaelectronics.com/genset/manual-auto-start-control-modules/dse4610DSE9474 24 Volt 30 Amp Intelligent Battery Charger
The DSE9474 is an intelligent 24-volt, 30 amp CAN enabled switch-mode battery charger that can be programmed for different charging curves. This helps to maximise battery life. The charger is programmed using the DSE Configuration Suite Software. The charger can be DIN rail or chassis mounted and has three built-in LEDs to indicate current charging status and fault conditions. The charger continues to operate during cranking and running and accepts multiple AC voltage connections. ...
https://www.deepseaelectronics.com/power/intelligent-battery-chargers/dse9474DSE8620 MKII Synchronising Auto Mains (Utility) Failure Load Share Control Module
The DSE8620 MKII represents the latest in complex load sharing & synchronising control technology. Designed to synchronise a single genset with a mains (utility) supply, the DSE8620 MKII control module is packed with multiple features and benefits that are unrivalled across the generator control industry. The controller also has the option to be configured for use as a DSE8610 MKII Auto Start Load Sharing & Synchronising Control Module. When converted for use as a DSE8610 MKII the unit...
https://www.deepseaelectronics.com/genset/load-sharing-synchronising-control-modules/dse8620-mkii