Manual & Auto Start Control Modules

DSE6110

Auto Start Control Module

The DSE 6110 is an Auto Start Control Module developed to provide a wide range of operating and monitoring features for single diesel and gas gen-sets. 

OVERALL SIZE
216 mm x 158 mm x 43 mm (8.5” x 6.2” x 1.5”) 
PANEL CUTOUT SIZE
184 mm x 137 mm (7.2" x 5.3")
MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)

PRODUCT VARIANTS
6110-03 - 6110 MKII Auto Start Control Module

Request a Quote

e -
Please select a product
Please enter a quantity
e +

add another product

Please enter your title
Please enter your first name
Please enter your surname
Please enter your company name
Please select your country
Please enter a delivery County/State
Please enter your email
Please enter your mobile number
Webform URL: Website Option: Webform: Named Distributor: Distributor's Email: Named Reseller: Reseller's Email:


l

Product Highlights

Key Features & Benefits

Key Features

Key Benefits

Support for 0-10 V & 4-20mA oil pressure senders.
Provides flexibility for use with multiple sensors and engine types.
Large back-lit text LCD display.
Displays information to the operator in a clear and concise format.
Ensures the display continues to operate in extreme cold weather conditions.
3-phase generator sensing.
Provides true generator sensing.
Generator/load current monitoring & protection.
Configurable analogue/digital inputs (9).
Provides multiple installation options.
Configurable DC, volt-free and staged loading outputs (6).
Provides full generator load control.
CAN, MPU & alternator speed sensing (selectable depending on engine type).
Tier 4 CAN engine support.
Ensures the control module can be used with the latest in modern electronic engine technology.
Configurable event log (10).
Provides access to historical alarms and operational status.
DSE Configuration Suite PC Software.
Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.
Fuel and start outputs (configurable on CAN).
Provides multiple installation options.
  • Additional Features
  • Engine hours counter.
  • Engine pre-heat.
  • Remote start input.
  • Battery voltage monitoring.
  •  

Specification

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. 
LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT
178 mA at 12 V, 95 mA at 24 V

MAXIMUM STANDBY CURRENT
88 mA at 12 V, 50 mA at 24 V

CHARGE FAIL/EXCITATION RANGE
0 V to 35 V

OUTPUTS

OUTPUT A (FUEL)
2 A DC at supply voltage

OUTPUT B (START)
2 A DC at supply voltage

AUXILIARY OUTPUTS C,D,E & F
2 A DC at supply voltage

GENERATOR

VOLTAGE RANGE
15 V - 333 V AC (L-N)

FREQUENCY RANGE
3.5 Hz to 75 Hz

MAGNETIC PICK-UP

VOLTAGE RANGE
+/- 0.5 V to 70 V

FREQUENCY RANGE
10,000 Hz (max)

Environmental Testing Standards

ELECTRO-MAGNETIC  COMPATIBILITY
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.

ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.

TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.

VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.

HUMIDITY
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.

SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.

DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the control panel with the optional sealing gasket.

Connection Diagram

DSE6110 connection diagram

Product Variants

6110-01 - 6110 REMOTE START MPU FREQUENCY

6110-03  - PR- 6110 MKII AUTO START