Manual & Auto Start Control Modules
DSE4410 (Single Phase)
Auto Start Control Module (Single-Phase)
The DSE4410 Single Phase is an Auto Start Control Module for single genset applications. The module has been designed to work with electronic and non-electronic applications providing advanced monitoring and protection features. The module is available in CAN bus and magnetic pick-up versions (to be specified on ordering). The module includes a back-lit LCD display which clearly shows the status of the generator at all times. It monitors frequency, oil pressure, coolant temperature and fuel level. The module has also been designed to display the warning and shutdown status of the engine.
Request a Quote
Product Highlights
Key Features
Specification
Environmental Testing Standards
ELECTRO-MAGNETIC COMPATIBILITY
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.
VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
HUMIDITY
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.
SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the control panel with the optional sealing gasket.
