Overview Displays & Remote Communications
Remote Battery Charger Display Module
The DSE2541 Remote Battery Charger Display Module has been designed to work with all intelligent and enclosed battery chargers. The module displays information to the operator on charge output, charge cycle, mains (utility) supply status and indicates when fault conditions are present.
The DSE2541 enables the user to control a battery charger remotely via the front panel buttons. The DSE2541 and its connected charger can be configured using the front panel buttons.
140 mm x 113 mm x 43 mm (5.5” x 4.4” x 1.7”)
PANEL CUTOUT SIZE
118 mm x 92 mm (4.6” x 3.6”)
MAXIMUM PANEL THICKNESS
2541-02 - 2541 Remote Battery Charger Display Module
Request a Quote
Key Features & Benefits
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT
80 mA at 12 V, 75 mA at 24 V
MAXIMUM STANDBY CURRENT
65 mA at 12 V, 60 mA at 24 V
3 A at 30 V DC volt-free relay
Environmental Testing Standards
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment.
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the control panel with the optional sealing gasket.
2541-02 - 2541 B/CHARGER REMOTE DISPLAY