Manual & Auto Start Control Modules

B BACK
z
360° View

DSE3110

Manual & Auto Start Control Module
The DSE3110 can be utilised as a manual or auto start module for single gen-set applications or engine only applications. The module has been designed to work with non-electronic engines, providing advanced engine monitoring and protection features.

The DSE3110 includes a back-lit icon LCD display which clearly shows the status of the generator set at all times. The module monitors engine speed, frequency, voltage and engine run hours and also displays the warning and shutdown status.

The module includes fixed and configurable outputs as well as configurable inputs making this product ideal for a wide variety of applications. The module can either be programmed using the front panel or by using the DSE Configuration Suite PC software.
Overall (W x H x D)
99 mm x 79 mm x 41.5 mm / 3.9” x 3.11” x 1.63”

Panel Cut-Out (W x H)
80 mm x 68 mm / 3.15” x 2.86”

Maximum Panel Thickness
8 mm / 0.31”
Request a Quotek Find Local Distributork

Request a Quote

✕
e -
Please select a product
Please enter a quantity
e +

add another product

Please enter your title
Please enter your first name
Please enter your surname
Please enter your company name
Please select your country
Please enter a delivery County/State
Please enter your email
Please enter your mobile number
Webform URL: Website Option: Webform: Named Distributor: Distributor's Email: Named Reseller: Reseller's Email:

Product Highlights
Related Products
l

Product Highlights

Key Features

Key Features

Back-lit icon LCD display
Front panel editing
LED and LCD alarm indication
Power save mode
PC configurable
6 digital inputs
4 outputs (2 configurable and 2 fixed function)
Configurable timers and alarms
Alternative configuration.
Remote start input.
Generator voltage display
Generator frequency display
Battery voltage display
Engine speed display
Hours counter.
Engine pre-heat.
Comprehensive warning, electrical trip or shutdown protection on fault conditions.

Specification

DC Supply

CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. Backlight will not be maintained during cranking. 

MAXIMUM OPERATING CURRENT
76 mA at 12 V, 61 mA at 24 V

MAXIMUM STANDBY CURRENT
45 mA at 12 V, 43 mA at 24 V

CHARGE ALTERNATOR EXCITATION / FAIL RANGE
8 V to 35 V fixed power source 2.5 W

Inputs

DIGITAL
Number: 6

Type: Negative Switching

EMERGENCY STOP 
Number: 1

Type: Negative Switching

MAGNETIC PICK-UP
Voltage Input Range: 0.5 VPeak to 70 VPeak

Frequency Input Range: 5 Hz to 10 kHz

Outputs

DIGITAL
Number: 4

Type: Positive Switching

Environmental Testing Standards

ELECTRO-MAGNETIC  COMPATIBILITY
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.

ELECTRICAL SAFETY
BS EN 61010
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory use.

TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.

VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 Gn.

HUMIDITY
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.

SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.

DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - From the front of the module when installed into a control panel (with optional gasket) 

Connection Diagram

DSE3110 connection diagram

Product Variants

No product variants available
VIEW ALL Manual & Auto Start Control Modulesk