Search Results
FAQs | DSEAts
How can I prevent Fail to Stop on the DSE ATS controller when the generator is run from its local controls? Which ATS controller is most suited for a system with two mains supplies to select one available supply from two? My cooling timer has expired but my engine is still running. What should I do? Do I need to fit breaker auxiliary contacts to my DSE ATS Controller? Where can I find the DSE Configuration Suite Software and supporting documentation for my DSE product? I’m installing the...
https://www.deepseaelectronics.com/ats/faqsFAQs | DSEPower
What size charger should I use for a battery that regularly discharges to a low level? What size charger should I use for a battery that is used as a starter battery on a generator? What types of batteries are compatible with DSE Battery Chargers? Does my DSE battery charger need to be disconnected when the engine is running? Is it possible to install DSE battery chargers in series to achieve a higher voltage or in parallel to achieve a higher current output? Can I use DSE chargers to supply...
https://www.deepseaelectronics.com/power/faqsDSE8003 MKII 7" Graphical Colour Multi-Set Remote Overview Display
The DSE8003 is a full colour 7” graphical remote overview display. It has been designed to seamlessly integrate with 86xx MKII load share control modules. The MKII version offers an improved graphical user interface and faster operating response times compared to its MKI predecessor. Using a RS485 link a single overview display can be connected to multiple control modules over a maximum distance of 1.2km.
https://www.deepseaelectronics.com/genset/remote-communications-overview-displays/dse8003-mkiiDSE892 Simple Network Management Protocol (SNMP) Gateway
The DSE892 connects DSE control modules to external SNMP systems. Once a connection is made full monitoring and control functionality becomes active. The gateway device specialises in monitoring the instrumentation and operating state of the connected DSE control module.
https://www.deepseaelectronics.com/genset/remote-communications-overview-displays/dse892DSE7410 MKII Auto Start Control Module Software Downloads
The DSE7410 MKII is an Auto Start Control Module suitable for a wide variety of single, diesel or gas, gen-set applications. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC. The module includes USB, RS232, RS485 and Ethernet ports as well as dedicated DSENet® terminals for system expansion.The module is compatible with electronic (CAN) and non-electronic...
https://www.deepseaelectronics.com/genset/manual-auto-start-control-modules/dse7410-mkii/softwareDSE7420 MKII Auto Mains (Utility) Failure Control Module Software Downloads
The DSE7420 MKII is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications. Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC. The DSE7420 MKII will also monitor the mains (utility) supply. The module include USB, RS232, RS485 and Ethernet ports as well as dedicated DSENet® terminals for...
https://www.deepseaelectronics.com/genset/auto-mains-utility-failure-control-modules/dse7420-mkii/softwareDSEP100 Mains Decoupling Relay Software Downloads
FULLY G99/1 & G98/1 COMPLIANTThe DSEP100 G99/G59 Mains(utility) Protection Relay detects changes in the mains (utility) supply to which the distributed energy resource (DER) is connected.If a mains (utility) failure is detected, the DSEP100 will disconnect the equipment in line with national and international DNO requirements. This removes the risk of an islanded grid being formed and protects DER equipment.DSEP100 is suitable for use with all DER equipment supplying power in parallel with...
https://www.deepseaelectronics.com/genset/mains-utility-protection-relays-power-meters/dsep100/softwareDSE7310 MKII Auto Start Control Module Software Downloads
The DSE7310 MKII is an auto start control module suitable for a wide variety of single, diesel or gas, gen-set applications. Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC.The module include USB, RS232 and RS485 ports as well as dedicated DSENet® terminals for system expansion. The DSE7310 MKII is compatible with electronic (CAN) and non-electronic...
https://www.deepseaelectronics.com/genset/manual-auto-start-control-modules/dse7310-mkii/softwareDSE334 Auto Transfer Switch Control Module Software Downloads
The DSE334 Automatic Transfer Switch Control Module monitors the voltage and frequency of an incoming AC supply from two different sources. These sources can be generator or mains (utility), or a combination of both. The control module monitors Source 1 (S1) and Source 2(S2). When a failure occurs a start command is issued to the inactive source to take over the load. The module will return the load to the mains (utility) as soon as this becomes available. To view UL ...
https://www.deepseaelectronics.com/ats/automatic-transfer-switch-control-modules/dse334/softwareBC2410Ei 12/24 Volt 10 Amp Enclosed Intelligent Battery Charger Software Downloads
NFPA 110 (QWIR) COMPLIANT / UL LISTEDThe DSEBC2410Ei is an enclosed intelligent battery charger designed to work with multiple battery types across a wide range of applications. The advanced technology has been developed to automatically detect system settings and charging profiles including cell voltage and boost voltage to provide high-levels of charging support. To view UL Certification click here. Additional high-level features include external system integration via Modbus RS485, remote...
https://www.deepseaelectronics.com/power/intelligent-battery-chargers/bc2410ei/software