Vehicle & Off-Highway Machinery Control Systems (M-Series)
DSEM835-02
3.5" Programmable Display
Release Notes
M-Series Release Notes
Information on firmware, device descriptors, packages and CODESYS.
Version 64: 13/11/2026
Software Downloads
DSEServiceTool
Software tool for DSEControl M-Series products.
Allows the user to upgrade the firmware and bootloader of supported devices.
Allows the user to download new CODESYS ‘boot applications’.
Supports Ethernet connection (DSEM640, DSEM643, DSEM840, DSEM870, DSEM871, DSEM810, DSEM812, DSEG810)
Supports CAN connection (DSEM640 V2+, DSEM643 V2+, DSEM835, DSEM240
- 02.07.2026
- English
- Windows 10, 11 (32-bit and 64-bit)
CODESYS Gateway Configuration File
Full instructions are included within the relevant product operator manual.
- 06.04.2020
- English
DSE CODESYS Package
Install CODESYS before installing this package.
Supported targets:
M640 V1.0
M640 V2.0
M640 V3.0
M643 V1.0
M643 V2.0
M643 V3.0
M835-01 V1.0
M835-01 V1.1
M835-02 V2.0
M835-02 V2.1
M840-01 V3.1
M840-02 V4.1
M870-01 V6.0
M870-02 V6.0
M870-03 V6.0
M871-01 V5.0
M810 V1.0
M810 V2.0
M810 V2.1
M812 V1.0
M812 V1.1
M812 V2.0
M812 V3.0
M812 V3.1
M812 V4.0
Included libraries:
DSE CAN V1.9
DSE UTILS V2.4
DSE J1939 V1.2
DSE Keypads V1.1
Note older versions are contained within the package, see release notes
- 22.05.2026
- English
- CODESYS 3.5
CODESYS 3.5 SP12
- User-friendly programming tool.
- Allows the user to program compatible DSEControl® products.
- Fully programmable via IEC 61131-3 Languages (FBD, LD, IL, ST, SFC).
- (For DSEM640, DSEM643, DSEM835, DSEM840, DSEM870 V1 to V5, DSEM812 V1. After Installation, download and install the DSE CODESYS Package)
- For DSEM812 V2 or DSEM870 V6, use CODESYS 3.5.17 instead.
- For DSEM812 V3, DSEM810 V1, or DSEM870 V6, use CODESYS 3.5.19 instead.
- For DSEM812 V4 or DSEM810 V2, use CODESYS 3.5.21 instead.
- 08.05.2018
- English
- Windows 11 (32/64 Bit)
Module Firmware
DSE M835-02 Firmware Upgrade File
Firmware file for the M835-02. (This firmware is not suitable for DSEM835-01)
Now supports quadrature encoder and pulse counters.
The DSEServicetool Manual includes instructions on how to perform the firmware upgrade via CAN connection.
(NOTE: For DSEM835-01, use firmware V1.1.7)
- 22.05.2026
- English
Training Documents
Using CODESYS Unit Conversion
Application and Device Versions
Data Conversion in CODESYS (CAN, MODBUS etc)
Persistent Variables CODESYS
Font Use in CODESYS and DSEMSeries devices
DSE_CAN Compiled Library Usage Guide and Examples
The library itself is contained within DSE CODESYS Package.