Engine & Pump Control Modules (E-Series)
DSEE050
eView® Engine Display
112.5mm x 115 mm x 49 mm / 4.43 " x 4.53 " x 1.93 "
PANEL CUT OUT
PRODUCT VARIANTS
E050-01
Request a Quote
Product Highlights
Key Features
Specification
DC SUPPLY
CONTINUOUS VOLTAGE RATING8 V TO 32 V continuous (5 V for up to 1 minute)
CRANKING DROPOUTS
Able to survive 0 V for 100 ms, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries
MAXIMUM OPERATING CURRENT
300 mA at 12 V, 150 mA at 24 V
MAXIMUM STANDBY CURRENT
115 mA at 12 V, 65 mA at 24 V
INPUTS
QUANTITY4
TYPE
ACCURACY
1 %
RESOLUTION
0.2 %
OUTPUTS
QUANTITY3
TYPE
Digital - High side supplied from plant voltage +ve
CURRENT
1 ADC at 85 ˚C / (185 ˚F)
Environmental Testing Standards
ELECTRO MAGNETIC COMPATIBILITY
BS EN 6100-6-2
Electromagnetic Compatibility (EMC) Noise Immunity
BS EN 6100-6-4
Electromagnetic Compatibility (EMC) Emission Standard
ISO 11452
Electromagnetic Compatibility - Road Vehicles
ISO 7637-3: 2016
Road Vehicles - Electrical disturbances from conduction and coupling
Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
ELECTRICAL SAFETY
BS EN 61010
Safety Requirements for Electrical Equipment for Measurement, Control & Laboratory Use.
BS EN 61010: 2010
Part 1: General Requirements
BS EN 61010-2-030: 2010
Part 2-030: Particular Requirements for Testing Measuring Circuits
ELECTRICAL TESTS
ISO 16750-2: 2012
Road vechicles - Environmental conditions and testing for electrical and electronic equipment.
Part 2: Electrical loads
4.6.3 Starting profile
4.6.4 Load dump
CLIMATIC TESTS
EN 60068-2-30
Damp heat, cyclic upper temperature 55 ˚C
EN 60068-2-78
Damp heat, steady state test temperature
40 ˚C/93 % RH (21 Day Duration)
MECHANICAL TESTS
EN 60068-2-6
Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
EN 60068-2-27
Part 2-27: Tests - Test Ea: Shock
TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -40 °C (-40 °F)
BS EN 60068-2-2
Bb/Be Dry Heat +85 °C (185 °F)
CHEMICAL
ISO 16750-5
Chemical testing for electrical and electronic equipment - Road Vechicles
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
BS EN 60529
IP67/NEMA 6.