Search Results
DSEA106 Auxiliary / Shunt Powered Digital AVR Product Downloads
The DSEA106 Digital Automatic Voltage Regulator (AVR) is designed to regulate the output voltage of an AC alternator. The DSEA106 is supplied by either a stator auxiliary winding or a shunt system taking the power from the output windings. The DSEA106 eliminates the complexities involved with analogue AVR designs. Analogue AVR designs can be over sensitive to changes in temperature which affects stability.
https://www.deepseaelectronics.com/genset/digital-automatic-voltage-regulators-avr/dsea106/downloadsDSE891 DSEWebNet® Gateway - Ethernet Only Product Downloads
The Gateway DSE891 connects to the DSE data server by an integral Ethernet connection only. This is most suited for fixed installations where an ADSL / DSL cable broadband service is available (external broadband modem required, not supplied by DSE).
https://www.deepseaelectronics.com/genset/remote-communications-overview-displays/dse891/downloadsDSE103 MKII Speed Switch Control Module Product Downloads
The DSE103 MKII Speed Switch Control Module monitors the speed of an engine by detecting pulses from a magnetic pick-up device or alternative output. Independent relays can be operated at different speed settings. The relays can be set between 0-400% of the engines rated running speed. This flexibility allows the module to be used for multiple application types including under/over speed and crank disconnect.
https://www.deepseaelectronics.com/control/engine-pump-control-modules-e-series/dse103-mkii/downloadsM812 Connector Harness 016-185 Product Downloads
Set of 2 coded AMP SEAL connectors pre-wired with 1.2 m (3ft 11") cable.Note: Suitable for development use only
https://www.deepseaelectronics.com/control/accessories/m812-connector-harness/downloadsDSE705 Auto Transfer Switch Control Module Product Downloads
The DSE705 is an Automatic Transfer Switch Control Module for use with generator applications. The module monitors an incoming mains (utility) supply and issues a start command to the generator control system when the power fails. When the generator is producing the required output the DSE705 switches the load from the mains (utility) supply. When the mains (utility) supply returns the DSE705 switches the load back. The generator is instructed to cool down and stop.
https://www.deepseaelectronics.com/ats/automatic-transfer-switch-control-modules/dse705/downloadsDSE9462 (Dual Output) Dual Output Intelligent Battery Charger Product Downloads
Our Multiple Output Chargers have been developed to provide intelligent, lightweight charging for use on-board standby vehicles and systems that use multiple applications or loads. Chargers within the range can be configured to provide different output levels and programmed for optimum performance with different charging curves to maximise the life of the battery. The DSE9462 is configured using the DSE Configuration Suite software via a USB connection. The charger is mounted to a chassis...
https://www.deepseaelectronics.com/power/intelligent-battery-chargers/dse9462-dual-output/downloadsDSE7410 Auto Start Control Module Product Downloads
The DSE7410 is a sophisticated mono display auto start control module packed with industry leading features to enhance single-set control. The module can be used across a wide range of diesel and gas gen-set applications.
https://www.deepseaelectronics.com/genset/manual-auto-start-control-modules/dse7410/downloadsDSE9473 24 volt, 15 amp Intelligent Battery Charger Product Downloads
The DSE9473 is an intelligent 24 volt, 15 amp switch-mode battery charger that can be programmed for different charging curves. This helps to maximise battery life. The charger is programmed using the DSE Configuration Suite Software. The charger can be Chassis or DIN Rail mounted and has three built-in LED's to indicate current charging status and fault conditions. The charger continues to operate during cranking and running and accepts multiple AC voltage connections.
https://www.deepseaelectronics.com/power/intelligent-battery-chargers/dse9473/downloadsDSEM840 MKI 4.3" Programmable Display Product Downloads
The DSEM840 is a 4.3" programmable display developed for use on vehicles and off-highway machinery. The display provides high levels of flexibility for multiple application types and is configured using CODESYS 3.5. The M840 can be used as a stand alone product or with additional M-Series products to create extremely powerful applications.
https://www.deepseaelectronics.com/control/vehicle-off-highway-machinery-control-systems-m-series/dsem840-mki/downloads