Search Results
DSE705 Auto Transfer Switch Control Module Product Downloads
The DSE705 is an Automatic Transfer Switch Control Module for use with generator applications. The module monitors an incoming mains (utility) supply and issues a start command to the generator control system when the power fails. When the generator is producing the required output the DSE705 switches the load from the mains (utility) supply. When the mains (utility) supply returns the DSE705 switches the load back. The generator is instructed to cool down and stop.
https://www.deepseaelectronics.com/ats/automatic-transfer-switch-control-modules/dse705/downloadsDSE9462 (Dual Output) Dual Output Intelligent Battery Charger Product Downloads
Our Multiple Output Chargers have been developed to provide intelligent, lightweight charging for use on-board standby vehicles and systems that use multiple applications or loads. Chargers within the range can be configured to provide different output levels and programmed for optimum performance with different charging curves to maximise the life of the battery. The DSE9462 is configured using the DSE Configuration Suite software via a USB connection. The charger is mounted to a chassis...
https://www.deepseaelectronics.com/power/intelligent-battery-chargers/dse9462-dual-output/downloadsDSE7410 Auto Start Control Module Product Downloads
The DSE7410 is a sophisticated mono display auto start control module packed with industry leading features to enhance single-set control. The module can be used across a wide range of diesel and gas gen-set applications.
https://www.deepseaelectronics.com/genset/manual-auto-start-control-modules/dse7410/downloadsDSE9473 24 volt, 15 amp Intelligent Battery Charger Product Downloads
The DSE9473 is an intelligent 24 volt, 15 amp switch-mode battery charger that can be programmed for different charging curves. This helps to maximise battery life. The charger is programmed using the DSE Configuration Suite Software. The charger can be Chassis or DIN Rail mounted and has three built-in LED's to indicate current charging status and fault conditions. The charger continues to operate during cranking and running and accepts multiple AC voltage connections.
https://www.deepseaelectronics.com/power/intelligent-battery-chargers/dse9473/downloadsDSEM840 MKI 4.3" Programmable Display Product Downloads
The DSEM840 is a 4.3" programmable display developed for use on vehicles and off-highway machinery. The display provides high levels of flexibility for multiple application types and is configured using CODESYS 3.5. The M840 can be used as a stand alone product or with additional M-Series products to create extremely powerful applications.
https://www.deepseaelectronics.com/control/vehicle-off-highway-machinery-control-systems-m-series/dsem840-mki/downloadsDSE6110 MKII Auto Start Control Module Product Downloads
The DSE 6110 MKII is an Auto Start Control Module developed to provide a wide range of operating and monitoring features for single diesel and gas gen-sets.
https://www.deepseaelectronics.com/genset/manual-auto-start-control-modules/dse6110-mkii/downloadsDSE330 Auto Transfer Switch Control Module Product Downloads
The DSE330 Automatic Transfer Switch Control Module monitors the voltage and frequency of an incoming AC supply from two different sources. These sources can be generator or mains (utility), or a combination of both. The control module monitors Source 1 (S1) and Source 2(S2). When a failure occurs a start command is issued to the inactive source to take over the load. The module will return the load to the mains (utility) as soon as this becomes available.
https://www.deepseaelectronics.com/ats/automatic-transfer-switch-control-modules/dse330/downloadsDSE9484 12 volt 30 amp Intelligent Battery Charger Product Downloads
The DSE9484 is an intelligent 12-volt, 30 amp switch mode battery charger that can be programmed for different charging curves. This helps to maximise battery life. The charger is programmed using the DSE Configuration Suite Software. The charger is chassis mounted and has three built-in LEDs to indicate current charging status and fault conditions. The charger continues to operate during cranking and running and accepts multiple AC voltage connections.
https://www.deepseaelectronics.com/power/intelligent-battery-chargers/dse9484/downloadsDSE9461 12/24 volt 10 amp Enclosed Intelligent Battery Charger Product Downloads
NFPA 110 and NFPA 20 (QWIR) COMPLIANTThe DSE9461 is an intelligent enclosed battery charger that has been developed to offer the highest levels of safety, usability and battery life and performance. The charger can be used straight out of the box or connected to a PC via a USB cable to modify the pre-set charging curves. The charging curve can be selected from the PC software or user created for advanced battery applications. The charger can be used as a power supply and includes a...
https://www.deepseaelectronics.com/power/12-volt-battery-chargers/dse9461/downloads