Search Results
DSEE100 Engine Only Control Module Product Downloads
The E100 is an Engine Only Control Module designed to provide flexible engine control with built-in monitoring and protection. The module is fully configurable for a wide range of applications including engine driven pumps and compressors. Control functions include manual and automatic engine start and load control and built-in run-time scheduler. The DSEE100 also features an event log to help make fault diagnosis extremely simple. The module is configured using the DSE Configuration Suite...
https://www.deepseaelectronics.com/control/engine-pump-control-modules-e-series/dsee100/downloadsDSEM810 (Keyed) 10” Programmable Display Product Downloads
The DSEM810 is a 10” programmable display designed for use on vehicles and off-highway machinery. Developed for use as a standalone product or as part of a larger system, the DSEM810 provides users with outstanding flexibility. CANopen, SAE J1939 and raw CAN connectivity allow the configurable on-board I/O to be supplemented with a range of devices including DSEM64X programmable controllers or CAN enabled distributed I/O such as DSE2160 or DSE2170.Two independent CAN interfaces and onboard...
https://www.deepseaelectronics.com/control/vehicle-off-highway-machinery-control-systems-m-series/dsem810-keyed/downloadsDSE Assistant Configuration File Upload Tool Product Downloads
DSE Assistant is an intelligent software tool that allows a single configuration file to be uploaded to multiple DSE control modules in mass production factory environments. Users have the ability to create a single file that contains the config, firmware and language files. This is then added to DSE Assistant and uploaded to connected modules. The software can also be used to read and save files from within a control module for use in other modules or to assist with config analysis. Please...
https://www.deepseaelectronics.com/genset/software-tools/dse-assistant/downloadsDSEG8680 Bus-Tie Controller Product Downloads
The DSEG8680 Bus-Tie controller is designed to work with the DSEG8660 and DSEG8600 (configured for use as a multi-set controller, mains (utility) controller or group controller) to provide control solutions for complicated system design. The DSEG8680 is configurable for use as a bus-tie controller or load switch controller. This enables the controller to use the AMSC (Advanced Multi-Set Communications) link to synchronise two bus segments together within a DSEG8xxx system and allow them to...
https://www.deepseaelectronics.com/genset/advanced-paralleling-gen-set-controllers/dseg8680/downloadsDSE4610 Auto Start Control Module Product Downloads
The DSE4610 is a compact Auto Start Control Module that has been developed to provide an outstanding range of features within a compact enclosure.
https://www.deepseaelectronics.com/genset/manual-auto-start-control-modules/dse4610/downloadsDSE9474 24 Volt 30 Amp Intelligent Battery Charger Product Downloads
The DSE9474 is an intelligent 24 volt, 30 amp switched-mode battery charger that has fully programmable charging curves, making it suitable for multiple different battery chemistry types. The battery charger is programmed using the DSE Configuration Suite PC Software and is mounted direct to a chassis for ease of integration and installation. There are also three integrated LEDs mounted to the battery charger to indicate current charging status and fault conditions. The battery charger...
https://www.deepseaelectronics.com/power/intelligent-battery-chargers/dse9474/downloadsDSE8620 MKII Synchronising Auto Mains (Utility) Failure Load Share Control Module Product Downloads
The DSE8620 MKII represents the latest in complex load sharing & synchronising control technology. Designed to synchronise a single genset with a mains (utility) supply, the DSE8620 MKII control module is packed with multiple features and benefits that are unrivalled across the generator control industry. The controller also has the option to be configured for use as a DSE8610 MKII Auto Start Load Sharing & Synchronising Control Module. When converted for use as a DSE8610 MKII the unit...
https://www.deepseaelectronics.com/genset/load-sharing-synchronising-control-modules/dse8620-mkii/downloadsDSE6020MKII Auto Mains (Utility) Control Module Product Downloads
The DSE 6020 MKII is an Auto Mains (Utility) Failure Control Module developed to provide a wide range of operating and monitoring features for single diesel and gas gen-sets. To view UL Certification click here.
https://www.deepseaelectronics.com/genset/auto-mains-utility-failure-control-modules/dse6020mkii/downloadsDSE890 MKII DSEWebNet® / IoT Gateway - 4G (GSM/Ethernet) Product Downloads
The DSE890 MKII gateway is used in conjunction with supported DSE controllers and programmable displays to provide remote monitoring and communications data via DSEWebNet® or third party MQTT brokers. The DSE890 MKII communicates with up to five connected DSE controllers, monitoring instrumentation and operating states. Data is logged internally and transmitted from the gateway device to the DSEWebNet® or MQTT broker (Amazon Web Services, Google, IBM etc..). DSEWebNet® software is...
https://www.deepseaelectronics.com/genset/remote-communications-overview-displays/dse890-mkii/downloadsDSEM810 (Non Keyed) 10” Programmable Display Product Downloads
The DSEM810 is a 10” programmable display designed for use on vehicles and off-highway machinery. Developed for use as a standalone product or as part of a larger system, the DSEM810 provides users with outstanding flexibility. CANopen, SAE J1939 and raw CAN connectivity allow the configurable on-board I/O to be supplemented with a range of devices including DSEM64X programmable controllers or CAN enabled distributed I/O such as DSE2160 or DSE2170.Two independent CAN interfaces and onboard...
https://www.deepseaelectronics.com/control/vehicle-off-highway-machinery-control-systems-m-series/dsem810-non-keyed/downloads