Search Results
Austria | Distributors | DSEControl
Distributors for DSEcontrol in Austria
https://www.deepseaelectronics.com/control/distributors/austriaSwitzerland | Distributors | DSEControl
Distributors for DSEcontrol in Switzerland
https://www.deepseaelectronics.com/control/distributors/switzerlandDSE7410 MKII Auto Start Control Module Product Downloads
The DSE7410 MKII is an Auto Start Control Module suitable for a wide variety of single, diesel or gas, gen-set applications. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC. The module includes USB, RS232, RS485 and Ethernet ports as well as dedicated DSENet® terminals for system expansion.The module is compatible with electronic (CAN) and non-electronic...
https://www.deepseaelectronics.com/genset/manual-auto-start-control-modules/dse7410-mkii/downloadsDSE335 MKII Auto Transfer Switch Control Module Product Downloads
The DSE335 MKII is an automatic transfer switch controller designed to monitor the voltage and frequency of incoming AC supplies from two different sources. These are either generator or mains (utility), or a combination of both. The module monitors S1 (source 1) and in the event of a failure issues a start command to S2 (source 2). Various timing sequences are available to prevent nuisance starting on minor supply breaks. The module is configured using the DSE Configuration Suite PC...
https://www.deepseaelectronics.com/ats/automatic-transfer-switch-control-modules/dse335-mkii/downloadsBC2415i 24 Volt, 15 Amp Intelligent Battery Charger Product Downloads
The DSEBC2415i is an intelligent 24 volt, 15 amp switched-mode battery charger that has fully programmable charging curves, making it suitable for multiple different battery chemistry types. The battery charger is programmed using the DSE Configuration Suite PC Software and is mounted direct to a chassis or onto DIN rail for ease of integration and installation. There are also three integrated LEDs mounted to the battery charger to indicate current charging status and fault conditions.The...
https://www.deepseaelectronics.com/power/intelligent-battery-chargers/bc2415i/downloadsBC1205 12 Volt 5 Amp Battery Charger Product Downloads
The DSEBC1205 is designed to be permanently connected to a battery, to ensure it maintains a full charge. The charger includes LED indicators on the front that show when there is no battery connected and if a fault condition is present. The chargers continue to operate during cranking & running and have been designed to accept multiple AC voltage connections. The robust design makes the charger ideally suited to a wide range of markets including heavy and light industrial...
https://www.deepseaelectronics.com/power/12-volt-battery-chargers/bc1205/downloadsDSE7420 MKII Auto Mains (Utility) Failure Control Module Product Downloads
The DSE7420 MKII is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, gen-set applications. Monitoring an extensive number of engine parameters, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC. The DSE7420 MKII will also monitor the mains (utility) supply. The module include USB, RS232, RS485 and Ethernet ports as well as dedicated DSENet® terminals for...
https://www.deepseaelectronics.com/genset/auto-mains-utility-failure-control-modules/dse7420-mkii/downloadsDSEP100 Mains Decoupling Relay Product Downloads
FULLY G99/1 & G98/1 COMPLIANTG99 Type Tested Variant - Now Available (DSEP100-02)The DSEP100 G99/G59 Mains(utility) Protection Relay detects changes in the mains (utility) supply to which the distributed energy resource (DER) is connected.If a mains (utility) failure is detected, the DSEP100 will disconnect the equipment in line with national and international DNO requirements. This removes the risk of an islanded grid being formed and protects DER equipment.DSEP100 is suitable for use with...
https://www.deepseaelectronics.com/genset/mains-utility-protection-relays-power-meters/dsep100/downloadsDSEM812 (Keyed) 12" Programmable Display Product Downloads
The DSEM812 is a 12” Programmable Display designed for use on vehicles and off highway machinery and is the largest display in DSE’s programmable display range. Developed for use as a standalone product or with the DSEM64X programmable controllers, the DSEM812 provides users with outstanding flexibility. The DSEM812 is configured using CODESYS 3.5 or Qt, can be RAM or panel mounted and has the option to use in portrait or landscape orientation.
https://www.deepseaelectronics.com/control/vehicle-off-highway-machinery-control-systems-m-series/dsem812-keyed/downloadsDSE2160 (DSEM-Series) DSENet® Input / Output Expansion Module (DSEM-Series) Product Downloads
The DSE2160 DSENet® Input / Output Expansion Module has been developed for use with the DSEG8600 and DSEM-Series platforms. The DSE2160 extends the host modules input and output capabilities for increased application flexibility. This is achieved by providing an additional 8 inputs, consisting of 2 analogue inputs (both can be configured as digital) and 6 digital inputs (digital input A can be configured as a frequency input, pulse counter or RPM input). The DSE2160 also provides 8...
https://www.deepseaelectronics.com/control/accessories/dse2160-dsem-series/downloads